Solinst Model 122 Interfacemeter

Availability: In stock

Solinst Model 122 Interface Meter

Details

Reliable and accurate measurements of the oil/water level

The Solinst Model 122 Interface Meter is easy to use and gives accurate, reliable measurements of product level and thickness in tanks and wells. A steady tone and light indicate dense non-aqueous phase liquids (DNAPL) or light non-aqueous phase liquids (LNAPL) whilst an intermittent signal indicates water. The Solinst flat tape is available in lengths up to 450m or 1500 ft. The factory sealed probe on this interface meter is pressure proof and is designed for use in various monitoring applications.

The Solinst 122 Interface Meter holds up to 450m or 1500ft of narrow flat tape on a reel. It benefits from a long battery life, giving 300 hours or more of normal use with only one standard 9V battery. The 122 Interface Meter is also available as a Mini Interface Meter

Applications

  • Identifying oil/product
  • Wastewater management/landfill
  • Well monitoring

Additional Information

Download PDF

Data SheetData Sheet
Probes 122 P1 5/8” diameter (16 mm) stainless steel. The beam is emitted from within a cone-shaped tip made from rigid polyurethane. The tip is protected by an integral stainless steel shield. This probe is excellent for the vast majority of product monitoring situations. 122M Probe 5/8” diameter (16 mm) stainless steel. Similar to the P1 but shorter. Tape The easy-to-read markings on the tape are permanently heat-stamped into the tape. The dog bone shaped tape avoids adherence to wet surfaces in wells. It is resistant to most chemicals, and the smooth surface of the tape is easy to decontaminate, and easy to handle. M2 Feet and tenths: with markings every 1/100ft. M3 Meters and centimetres: with markings every mm. N2 and N3 As above, but on the narrow 1/4” (6 mm) tape for the 122 Mini Interface Meter.